Install Instructions

9
8
www.uponorpro.com
Fast Trak™ Installation Guide
9
Refer to the following instructions to properly install Fast Trak 1.3i.
1. Install the edge strips, making sure the PE foil is not falling down.
The PE foil will be folded down on top of the panel. These gaps
provide pathways for the overpour to seep into the wall and floor.
2. Lay the Fast Trak 1.3i panels on the subfloor, using a utility knife
to cut the panels to fit the flooring area. Note that the panels
feature two edges (one along the long side of the panel and one
along the short side) that allow the panels to interlock.
Warning: For safety reasons, take care to retract the knife when
not in use.
1
2
1
2
3
a
1
1
2
3
b
3
a
BB
B
180°
3
3
180°
3
a
3
b
3
a
3b
B
DO NOT allow a gap
between the edge strips.
DO NOT allow seams in
inner or outer corners.
Figure 11: Install Edge Strips
Figure 12: Install Panels
Ensure Edge Strips prevent
overpour from seeping under
panels to protect surrounding
structure from moisture damage.