Install Instructions

7
6
www.uponorpro.com
Fast Trak™ Installation Guide
5. Use a utility knife to cut the panels to fit the flooring area.
6. Snap the tubing into the panels using gentle pressure with
your foot. Lay the tubing from the outer wall(s) towards the
inner wall(s) and mark the tubing for easy identification when
connecting to the manifold.
Note: Minimum bend radius for
5
⁄16" Wirsbo hePEX tubing in the Fast Trak
0.5 panel is 3" (75mm).
r
6
16
17
18
123
456
789
101112
131415
Warning: For
safety reasons,
take care to
retract the knife
when not in use.
Minimum bend
radius is 3" (75mm).
Figure 7: Fit Panels to Floor Area
Figure 8: Install Tubing