Replacement Parts List

Uponor Radiant Heating and Cooling Systems
www.uponor.ca [phone] Radiant Heating and Cooling Systems
Radiant Heating and Cooling Systems
31
The Network System uses Cat5 connections and cables to connect the different hardware throughout an
installation. Use the Wire Converter in retrofi t applications where it is necessary to convert a pair of 18-2
low-voltage thermostat wires to Cat5. The Network Y-Connector is used when daisy-chaining controls to
simplify systems and eliminate additional wiring.
Part No. Part Description Each Qty.
A9011002 Network Wire Converter 1
A9011003 Network Y-Connector 1
The Touch Panel Interface (TPI) is a 5" x 7" high-defi nition touch screen that can integrate into any Climate
Co˘ntrol Network System. The screens provide the end user simple access to all the functions setting
through a simple-to-use, high-quality graphical program at one location. Items include: viewing rooms,
changing room temperatures, changing modes, setting schedules along with domestic hot water, snow-
melt functionality and much more. Multiple TPIs can be installed in a single system.
Part No. Part Description Each Qty.
A9070000 Touch Panel Interface (TPI) 1
Uponor provides a high-quality graphical software program that allows the installer to properly set up and
confi gure the system. The package comes with a USB key and software CD. The CD contains the necessary
fi les to run UCT product manuals, instruction sheets and other help fi les. The USB key is required to be
plugged into the laptop or computer the UCT program is running on. The key is not needed to access
manuals and documentation.
Part No. Part Description Each Qty.
A9090000 Uponor Confi guration Tool (UCT 1.0) Software Package 1
The proPANEL® 90 unit offers a simple pumping station, used for radiant heating or as a high-temperature
loop. The proPANEL 90 is pre-wired to a control interface, meaning the pump relay is connected to the
control interface using a Cat5 cable. The panel is prepared to connect to the Climate Co˘ntrol Multifunction
hydronic controller. The panel features 1-inch steel piping. The maximum recommended fl ow is 9 gpm.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 26 lbs.
Part No. Part Description Each Qty. Pkg. Qty.
A3509000 proPANEL 90 1 -
The proPANEL 90Z unit offers a pumping station with zoning capability (two zones). Featuring 1-inch
valves for zoning, the proPANEL 90Z is pre-wired to a control interface, meaning the pump relay is
connected to the control interface using a Cat5 cable. The two actuators controlling the valves are also
pre-wired into the interface. The panel Is prepared to connect to the Multifunction Climate Co˘ntrol
hydronic controller. The panel features 1-inch stainless steel piping on the primary side and ³⁄₄-inch
stainless steel piping on the secondary side. The maximum recommended fl ow is 4.5 gpm per outlet.
The panel features 1-inch stainless steel piping. The maximum recommended fl ow is 9 gpm.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 32 lbs.
Part No. Part Description Each Qty. Pkg. Qty.
A3509002 proPANEL 90Z 1 -
Network System Wiring
Accessories
Network Touch Panel
Interface (TPI)
Network Confi guration Tool
(UCT)
Fully Assembled Panels
proPANEL 90
proPANEL 90Z