Radiant Heating and Cooling Systems Uponor Logic for Radiant Floor Heating and Cooling is the ultimate in comfort control. • Com Comfort • Efficiency Advanced control systems • Adv Industry pioneer • Ind Proven • Pro Peace of mind • Pea w w w . u p o n o r.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems New and Innovative Solutions for Complete Radiant Systems Uponor Multifunction Climate Cŏntrol™ System Simple, intelligent and very intuitive, the Multifunction Climate Cŏntrol was designed with Uponor Logic to do everything better. It replaces all six of our previous pro Series models, and is made to run multiple proPANEL® pumping and mixing units with incredible ease.
Uponor Radiant Heating and Cooling Systems Heat-transfer tubing for closed-loop hydronic heating and cooling applications with an EVOH oxygen diffusion barrier that meets the German DIN Standard 4726. Wirsbo hePEX™ plus tubing is compatible with Uponor’s ProPEX™ and QS-style fittings and is manufactured to ASTM F876 and F877. Tubing is rated and listed by the Hydrostatic Stress Board of PPI at: 200°F at 80 psi, 180˚F at 100 psi and 73.4°F at 160 psi. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Multi-layer Composite (MLC) Tubing Coil Multi-layered (MLC) composite tubing consisting of an interior aluminum tubing lined with inner and outer layers of PEX. MLC tubing offers 100% oxygen diffusion. The stay-in-place rigid feature of the tubing works great for hydronic baseboard, radiators, unit heaters, air handlers or manifold connections. Uponor MLC tubing is manufactured to the following standard.
Uponor Radiant Heating and Cooling Systems Part No. Part Description Coil/Pallet F1040500 ¹⁄₂" Uponor AquaPEX tubing, 100-ft. coil 22 F1060500 ¹⁄₂" Uponor AquaPEX tubing, 300-ft. coil 18 F1120500 ¹⁄₂" Uponor AquaPEX tubing, 1,000-ft. coil 8 F1060625 ⁵⁄₈" Uponor AquaPEX tubing, 300-ft. coil 12 F1120625 ⁵⁄₈" Uponor AquaPEX tubing, 1,000-ft. coil 5 F1040750 ³⁄₄" Uponor AquaPEX tubing, 100-ft. coil 11 F1060750 ³⁄₄" Uponor AquaPEX tubing, 300-ft.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems TruFLOW Jr. Manifold with Isolation Valves TruFLOW Jr. Modular Manifold with Isolation Valves is used in conjunction with either the TruFLOW Jr. Modular Manifold with Balancing Valves or the TruFLOW Jr. Modular Valveless Manifold to complete the manifold set. The TruFLOW Jr. Modular Manifold with Isolation Valves allows quick isolation of the loop by closing the valve on the manifold.
Uponor Radiant Heating and Cooling Systems TruFLOW Jr. and Classic Assemblies with Balancing and Isolation Valves Maximum recommended flow to the manifold is 14 gpm for Jr. and 21 gpm for Classic. Part No. Item Description Dim (Body-Outlets) Each Qty. Pkg. Qty. A2660201 TruFLOW Jr. Assembly, B&I, 2-loop R32-R20 1 - A2660301 TruFLOW Jr. Assembly, B&I, 3-loop R32-R20 1 - A2660401 TruFLOW Jr. Assembly, B&I, 4-loop R32-R20 1 - A2660501 TruFLOW Jr.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems End Cap with Vent caps the end of the TruFLOW Jr. Modular Manifolds. It comes complete with swivel drain valve and manual air vent. Required gasket (A2403232) is included. End Cap with Vent TruFLOW Manifold Coupling Nipple Each Qty. Pkg. Qty. End Cap with Vent, R32 1 - A2403232 Manifold Gasket, spare part - 10 Part No. Part Description A2080032 Basic End Cap, R32 Each Qty. Pkg. Qty.
Uponor Radiant Heating and Cooling Systems Part No. Part Description A2610100 TruFLOW Classic Manifold Extension Kit, 2 loops Each Qty. Pkg. Qty. 1 - The TruFLOW Manifold Actuator Adapter is a replacement part. This M28 brass adapter converts the manifold actuator threads to fit the standard Uponor Thermal Actuator (A3010522) and Motorized Actuator (A3020522). TruFLOW Manifold Extension Kit TruFLOW Manifold Actuator Adapter Note: Use only with the TruFLOW Jr. and Classic Manifolds. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Engineered Plastic (EP) Heating Manifolds EP Heating Manifold Assembly with Flow Meter The Engineered Plastic (EP) Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations. The body ends feature R32 unions and the loop outlets have R20 male threads.
Uponor Radiant Heating and Cooling Systems Part No. Part Description A2670090 EP Heating Manifold Elbow, set of 2 Each Qty. Pkg. Qty. 1 - The End Cap with Vent and Drain allows filling and purging at the manifold. Part No. Part Description A2671250 EP Heating Manifold End Cap with Vent and Drain Each Qty. Pkg. Qty. 1 - The EP Heating Manifold Mounting Bracket mount the manifold assembly to a wall. Part No. Part Description A2670006 EP Heating Manifold Bracket, set of 2 Each Qty. Pkg.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Use the Valve Replacement Tool when replacing the Isolation Valve Body (A5670004) and Flowmeter Valve Body (A2670005). EP Heating Manifold Valve Replacement Tool EP Heating Manifold Replacement O-ring EP Heating Manifold Two-wire Actuator Part No. Part Description A2670007 EP Heating Manifold Valve Replacement Tool Each Qty. Pkg. Qty. 1 - Each Qty. Pkg. Qty.
Uponor Radiant Heating and Cooling Systems Part No. Part Description E6122000 Brass Manifold Pressure Test Kit Each Qty. Pkg. Qty. 1 - Brass Manifold Loop End Cap closes off unused QS20 loop connections. Install the supplied Brass Manifold Loop End Cap Gasket (A2400020) with the Loop End Cap to ensure a proper seal. Part No. Part Description Each Qty. Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX Fitting Assembly ProPEX Fitting Assembly with ProPEX insert connects ¹⁄₂" through ³⁄₄" Uponor PEX tubing to the brass manifolds. Sold as a two-piece assembly, it includes a ProPEX insert and R20 swivel nut. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Each Qty. Pkg. Qty.
Uponor Radiant Heating and Cooling Systems Radiant Heating and Cooling Systems Manifold Wall Cabinets The Manifold Wall Cabinet is adjustable to accommodate a brass manifold mounted in either a 2x4 or 2x6 stud wall. This is a recess-style cabinet and comes with a removable door-trim package. Mount an Uponor Zone Control Module inside the cabinet for ease of wiring and away from exposure or possible damage. Note: Wall Cabinets are suitable for all brass manifolds except TruFLOW Sr. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems HDPE Manifolds and Accessories HDPE Valveless Manifold Multiple-outlet HDPE Valveless Manifolds are manufactured with ³⁄₄" or 1" 303 stainless steel ProPEX fittings hydraulically pressed onto the outlet nipples. ProPEX connection and manifold are maintenance-free and suitable for direct burial.
Uponor Radiant Heating and Cooling Systems Part Description Each Qty. Pkg. Qty. B2192000 2" HDPE Flange Backup Ring 1 - B2193000 3" HDPE Flange Backup Ring 1 - B2194000 4" HDPE Flange Backup Ring 1 - Part No. Part Description Each Qty. Pkg. Qty. B2202000 HDPE End Cap, 2" HDPE 1 - B2203000 HDPE End Cap, 3" HDPE 1 - B2204000 HDPE End Cap, 4" HDPE 1 - Part No. Part Description Each Qty. Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Three-way Modulating Valve with Control Pump Relay Snow-melt Accessories The Climate Cŏntrol Multifunction unit provides mixing control of any Three-way Modulating Valves (010VDC) up to three different water temperatures in either radiant heating or snow-melting applications. Mount the Modulating Valve Control on or near the valve. Connect to the Climate Cŏntrol Multifunction unit using a standard Cat5 cable with RJ45 ends.
Uponor Radiant Heating and Cooling Systems Part No. Part Description Each Qty. Pkg. Qty. A8010002 A8010004 Data Stick (replacement part) 1 - Replacement Display 1 - A9030001 Cat5 Patch Cable (1 ft.) 1 - A9030003 Cat5 Patch Cable (3 ft.) 1 - A9030007 Cat5 Patch Cable (7 ft.) 1 - A9030015 Cat5 Patch Cable (15 ft.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Zoning Thermostat (T-75) Zoning Interface (I-75) Zoning Thermostat Mounting Kit Zoning Base Unit Antenna Zoning Cable Kit 24 Located near the radiant system manifolds, the Base Unit can handle up to 12 thermostats (sold separately) and control up to 14 thermal actuators (sold separately). Each actuator controls the flow of the water through loops of PEX tubing in a radiant system.
Uponor Radiant Heating and Cooling Systems Part No. Part Description A3600005 Zoning Language Stick, replacement Zoning Language Stick Each Qty. 1 Two-wire, slow-opening thermal actuator, mounts directly onto TruFLOW™ Classic and Jr. valved manifolds and connects to the Zoning base unit (C-55). It provides individual loop flow control on a multi-zoned manifold (a manifold serving more than one zone). Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Zone Control Module Powered Zone Controller Isolation Card The Zone Control Module is designed for use with Uponor Thermostats, Motorized Valve Actuators (MVAs), Thermal Actuators or Zone Valves. The Zone Control Module provides connection between the thermostats and their respective actuators or zone valves; and the connection between the end switches and the pump or boiler relay.
Uponor Radiant Heating and Cooling Systems Part No. Part Description Each Qty. Pkg. Qty. A3010525 ³⁄₄" Thermal Zone Valve, four-wire 1 25 A3010526 1" Thermal Zone Valve, four-wire 1 25 A3070525 ³⁄₄" MVA Zone Valve, four-wire 1 25 A3070526 1" MVA Zone Valve, four-wire 1 25 The Single-zone Pump Relay controls the operation of a single circulator or pump from a 24-volt signal. Relay includes secondary low-voltage terminals for boiler operation.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Network Primary Equipment Control (PEC) Network Supply Water Temperature Control (SWT) Network Zone Pump Control (ZPC) Network Control Cabinet and Components Network Digital Zone Control Module (DZCM) 28 The Primary Equipment Control (PEC) provides connections to the boiler(s), primary pump, domestic hot water tanks, outdoor sensor and an option system sensor.
Uponor Radiant Heating and Cooling Systems Part No. Part Description A9011100 Furnace and Air Condition Control (FAC) Each Qty. 1 The Network Heat Recovery Ventilator (HRV) Control board provides control of up to three speeds of operation: Low, Medium and High. All connections are screw terminals blocks and are removable from the board for ease of wiring. The board comes with a manual switch that can be set in the Off-Auto-Manual positions.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Modulating Valve Network Snow melting Control Network Thermostat Network System Sensor 30 Part No. Part Description A9013021 ³⁄₄" Three-Way Modulating Valve w/control, 0-10v (Cv=4.7) Each Qty.
Uponor Radiant Heating and Cooling Systems Part No. Part Description A9011002 Network Wire Converter 1 A9011003 Network Y-Connector 1 Each Qty. The Touch Panel Interface (TPI) is a 5" x 7" high-definition touch screen that can integrate into any Climate Cŏntrol Network System. The screens provide the end user simple access to all the functions setting through a simple-to-use, high-quality graphical program at one location.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems proPANEL 90M The proPANEL 90M unit offers a one-temperature mixing and pumping station using a three-way motorized mixing valve (0-10V). The proPANEL 90MZ is controlled by connecting it to a Multifunction unit. The proPANEL 90M is pre-wired to a control interface, meaning the pump relay and the mixing valve are connected to the control interface using a Cat5 cable.
Uponor Radiant Heating and Cooling Systems ProPEX EP Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX EP Elbow makes tight 90-degree connections for Uponor PEX tubing in supply and return mains. ProPEX EP Elbow Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty.
Uponor Radiant Heating and Cooling Systems ProPEX Brass Elbow with MIP Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Q4125050 LF Part Description ProPEX Brass Elbow, ¹⁄₂" PEX x ¹⁄₂" MIP Pkg. Qty. Case Qty. 25 100 ProPEX EP Tee makes diverting connections for Uponor PEX tubing in supply and return mains. Branch size is listed last in the part description. ProPEX EP Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems 36 ProPEX EP Reducing Tee ProPEX EP Reducing Tee makes diverting connections for Uponor PEX tubing in supply and return mains. Branch size is listed last in the part description. Note: ProPEX Tool is required. ProPEX Rings sold separately. Radiant Heating and Cooling Systems Part No. Part Description Pkg. Qty. Case Qty.
Uponor Radiant Heating and Cooling Systems ProPEX Brass Reducing Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. * * * * * * * * * * * * * * * * * Part No. Part Description Pkg. Qty. Case Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX Brass Male Threaded Adapter connects Uponor PEX tubing to male NPT threads and are intended as transition fittings from metal to PEX. ProPEX Brass Male Threaded Adapter Note: ProPEX tool is required. ProPEX Rings sold separately. Part No. Q4525050 LF Pkg. Qty. Case Qty.
Uponor Radiant Heating and Cooling Systems ProPEX DZR Brass Female Threaded Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. G4577575 G4571010 G4571313 G4571515 Part Description Each Qty. Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX Brass Fitting Adapter transitions Uponor PEX tubing to copper fittings. ProPEX Brass Fitting Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Q4505050 Q4505075 Part Description Pkg. Qty. Case Qty.
Uponor Radiant Heating and Cooling Systems The QS-style Coupling Nipple (brass) and the appropriate fitting assembly connect ⁵⁄₁₆", ¹⁄₂", ⁵⁄₈" or ³⁄₄" Uponor tubing together. Part No. Part Description Each Qty. Pkg. Qty. A4322020 A4322525 QS-style Coupling Nipple, R20 x R20 - 10 QS-style Coupling Nipple, R25 x R25 (for ³⁄₄" tubing only) - 10 The QS-style Conversion Nipple (brass) and the appropriate fitting connect ⁵⁄₁₆", ¹⁄₂", ⁵⁄₈" or ³⁄₄" Uponor tubing to ¹⁄₂", ³⁄₄" and 1" NPT. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Baseboard Fittings QS-style Baseboard Elbow and Tee QS-style Baseboard Elbow (brass) connects ¹⁄₂", ⁵⁄₈" and ³⁄₄" Uponor PEX tubing to ³⁄₄-inch copper baseboard with the appropriate QS-style fitting assembly. Note: QS-style Fitting Assembly is required. Part No. Part Description Each Qty. Pkg. Qty.
Uponor Radiant Heating and Cooling Systems Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. Part No. Part Description Each Qty. Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems MLC Press Fitting Brass Sweat Adapter MLC Press Fitting Brass Sweat Adapter transitions MLC tubing to copper pipe. Fittings come disassembled for sweating. Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. MLC Press Fitting Brass Fitting Adapter Part No. Part Description D4515050 MLC Press Fitting Brass Sweat Adapter, ¹⁄₂" MLC Tubing x ¹⁄₂" Copper Each Qty. Pkg. Qty.
Uponor Radiant Heating and Cooling Systems MLC Press Fitting Baseboard Elbows and Tees Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. Part No. Part Description D4385075 MLC Press Fitting Baseboard Elbow, ¹⁄₂" MLC Tubing x ³⁄₄" Copper Adapter Each Qty. Pkg. Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Quik Trak Combo Panel A5060712 A5060722 Part No. Part Description Each Qty. Pkg. Qty.
