Submittal Sheet

1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX™ is a trademark of Uponor Ltd.
ProPEX
®
Brass Ball Valve
Submittal Information
Revision A: April 30, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material (body, ball and stem):
Forged C37700 Brass
Maximum Temperature (no pressure):
250°F (121°C)
Maximum Working Pressure: 250 psi
Seal:
PTFE
O-ring: EPDM +FKM
Product Information and Application Use
Uponor ProPEX
®
Brass Ball Valve is intended for radiant
heating/cooling and hydronic piping applications.
1
Both ends are
manufactured with the ProPEX fitting for connections to Uponor
PEX pipe. The full-port valves are compatible with propylene glycol
mixtures up to 50%. Stem extensions can be installed to
accommodate up to 2" of pipe insulation. These ball valves are not
for use with potable-water applications.

Description Part No. Length Width Weight Cv
ProPEX Brass Ball Valve (full port), ½" PEX x ½" PEX
ProPEX Brass Ball Valve (full port), ¾" PEX x ¾" PEX
ProPEX Brass Ball Valve (full port), 1" PEX x 1" PEX
ProPEX Brass Ball Valve (full port), 1¼" PEX x 1¼" PEX
ProPEX Brass Ball Valve (full port), 1½" PEX x 1½" PEX
ProPEX Brass Ball Valve (full port), 2" PEX x 2" PEX
Stem Extension Kit for ½" and ¾" Valves
Stem Extension Kit for 1" and 1¼" Valves
Stem Extension Kit for 1½" and 2" Valves
A3205050
A3207575
A3201010
A3201313
A3201515
A3202020
F5630001
F5630002
F5620003
2.75"
3.25"
4.27"
4.75"
5.68"
7.125"
2.65"
2.65"
2.65"
0.92"
1.28"
1.81"
1.81"
2.07"
2.84"
0.906"
1.063"
1.26"
0.36 lbs. 7.0
0.52 lbs. 18.0
1.30 lbs. 29.0
1.44 lbs. 54.7
2.12 lbs. 68.2
4.18 lbs. 132.2
0.31 lbs. N/A
0.48 lbs. N/A
0.57 lbs. N/A
Installation
Install valve according to local building code. Do not dismantle. Refer to the Uponor Hydronic Piping Design Assistance Manual
(HPDAM) or the Uponor Radiant Floor Heating Installation Handbook for additional information.
Standards
CSA B137.5; ASTM F877; ASTM F1960; ASME E84; NSF359
Codes
IMC; UMC
Listings
ANSI/NSF 14; cNSFus-rfh; cQAIus
Related Applications
Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Hydronic Piping Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
www.uponorengineering.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
www.uponorengineering.com