Submittal Sheet

Uponor Heat-only Thermostat with Touchscreen
Submittal Information
Revision A: April 7, 2016
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Control:
Microprocessor control
Ambient conditions: Indoor use only, 32°F (0°C) to 104°F (40°C)
< 20-90% RH non-condensing
Operating voltage: 24 V ±10%, 60Hz, 1 VA
Maximum load: 1.3 A at 24 VAC
Floor sensor: 10K, J-curve thermistor
Product Information and Application Use
The Uponor Heat-only Thermostat with Touchscreen (A3100101) is a
simple, non-programmable thermostat designed to sense room air
temperature using operative temperature and/or floor temperature via
an optional floor sensor (A9010599).

Description Part Number Height Width Depth Weight
Uponor Heat-only Thermostat with Touchscreen
A3100101
5.375"
3.25"
0.75"
0.24 lbs.
Installation
Install the thermostat on an interior wall of the desired zone approximately 5 feet above the floor. Do not mount the thermostat on a location
that may be affected by localized heat sources or cold drafts. It may be necessary to install a draft barrier behind the thermostat to prevent
air from blowing through the wiring hole which can affect the thermostat’s built-in sensor. Refer to the Uponor Heat-only Thermostat with
Touchscreen Installation and Operation Manual for more information.
Standards
N/A
Codes
Complies with FCC Part 15 Class B and CAN ICES-3(B)/NMB-3(B)
Listings
N/A
Related Applications Contact Information
Radiant Heating Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com