Submittal Sheet

Powered Zone Controller
Submittal Information
Revision C: Nov. 12, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Transformer:
120VAC input
Maximum Combined Load:
3.0A and 7.0A
Ambient Conditions:
Indoor use only: 32°F to 122°F (0°C to 50°C)
Maximum Zones:
4 or 6 with priority
Product Information and Application Use
The Uponor Powered Four- and Six-zone Controllers feature transformers for
low-voltage operations and relays to operate line-voltage controls. Fully fuse-
protected, they also include an isolated switch and built-in domestic hot water
(DHW) priority switch. The indicator lights show full functionality of the
products wired to the Powered Zone Controllers. The green light indicates
power is connected. When the thermostat calls for heat, both the appropriate
zone valve and yellow indicator light activate. When the zone valve is fully
open, the end switch relay and red indicator light activate. A 3-amp delay fuse
protects the Powered Four-zone Controller. A 7-amp delay fuse protects the
Powered Six-zone Controller.

Description
Part Number
Length
Width
Depth
Weight
Powered Four-zone Controller
A3080404
10.25"
6.73"
2.84"
5.0 lbs.
Powered Six-zone Controller
A3080406
11.80"
7.50"
2.84"
7.5 lbs.
Installation
For installation instructions, refer to the Uponor Powered Zone Controllers Instruction Sheet.
Standards
CSA
Codes
N/A
Listings
UL
Related Applications
Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca