Product Overview

Two-wire Thermal Actuator
for Engineered Plastic (EP) Heating Manifold
Submittal Information
Revision A: April 24, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Operating Voltage: 24 VAC nominal
Operating Range: 22 V to 28 V
Maximum Close-off Pressure: 17 psi
Time to Open/Close: 3 to 5 minutes
Operating Current: 0.23 A (230mA)
Product Information and Application Use
Two-wire Thermal Actuator for the EP Heating Manifold is a slow-
opening thermal actuator, which mounts directly onto the EP
Heating Manifold and connects to the Climate Cŏntrol Zoning
System C-55 Base Unit (A3601012). It provides individual loop
flow control on a multi-zoned manifold.
9
Description Part Number Height Width Depth Weight
Two-wire Thermal Actuator for EP Heating Manifold A3030522 2.47" 1.58" 1.58" 0.22 lbs.
Installation
Refer to the Uponor Climate Cŏntrol Zoning Installation Guide for additional information.
Standards
Class II wiring
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling System
Snow and Ice Melting System
Permafrost Protection System
Turf Conditioning System
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca