Submittal Sheet

End Cap with Vent, R32
Submittal Information
Revision A: Feb. 20, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: UNS C3850 Brass
Maximum Working Pressure: 145 psi
Maximum Temperature/Flow: 220°F (104°C)/21.0 gpm
Connection: 1¼" BSP
Product Information and Application Use
The End Cap with Vent, R32, caps the end of the TruFLOW
TM
Jr. Modular
Manifolds. It comes complete with swivel drain valve and manual air vent.
Required gasket (A2403232) is included.
9
Description Part Number Length Width Height Weight
The End Cap with Vent, R32 A2803250 2.75" 1.75" 3.500" .900 lbs.
Manifold Gasket, spare part A2403232 1.56" 1.56" 0.625" .005 lbs.
Installation
Use with TruFLOW Jr. Manifolds (not preassembled). Use these end caps for the top manifold, following procedures outlined in the
Uponor Radiant Installation Handbook.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling Systems Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca