Install Instructions

22
www.uponorpro.com
22
Section 12
Manifold Balancing Form
When all tubing is connected to the manifold, measure the length of each
loop (subtract the length marking on the return line from the supply line, or
vice versa). Record the measurements in the form below as this information
is needed for balancing.
• Project
Room No.
• Floor No.
Date
• Manifold No.
End No. of Feet/Meters
Effective Tubing Length
Room Designation
Start No. of Feet/Meters
123456789101112
12
Heating Loop No.
Valve Setting/
Water Flow (gpm/
L
/
S
)