Install Instructions

1111
Section 5 Installing Manifold Accessories
2
1.
2.
1.
2.
1.
1.
2.
2.
3
Mounting Additional Manifold Outlets
Refer to the following instructions to properly mount one or more
additional outlets on the manifold.
1. Dismantle the End Cap with Vent and Drain.
2. Mount the desired number of extra outlets and reattach the End Cap
with Vent and Drain.
3. To angle some of the extra outlets in an opposite direction (e.g., up
instead of down), tighten the extra outlet completely and then loosen a
half turn.
B
1