Submittal Sheet

Engineered Plastic (EP) Heating Manifold Connection Piece
with R32 Union and Thermometer
Submittal Information
Revision A: Oct. 15, 2008
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material:
Metal Inserts:
Flat Gasket:
PA66-GF30
Brass C38500
IT-C
Product Information and Application Use
The Engineered Plastic (EP) Heating Manifold Connection Piece with R32 Union and
Thermometer (A2670032) transitions the manifold to supply and return piping via
an R32 union remote thread for use in hydronic radiant heating and cooling
systems. Use only propylene glycol in radiant systems with EP Heating Manifolds;
never use ethylene glycol.
9
Description Part Number Length Width Weight
EP Heating Manifold Connection Piece with R32 Union and Thermometer
EP Heating Manifold Thermometer, set of 2
A2670032
A2670132
3.8" 2.0" 1.04 lbs.
Installation
Hand-tighten the connection piece onto the supply and return on the manifold. For additional information, refer to the instruction sheet. Note: Use only
propylene glycol in radiant heating and cooling systems with EP Heating Manifolds; never use ethylene glycol. Refer to the EP Heating Manifold Installation
Guide for a complete chemicals list.
Standards
N/A
Codes
N/A
Listings
N/A
Related Applications Contact Information
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca