Submittal Sheet

Basic End Cap/Brass Manifold Loop End Cap
Submittal Information
Revision A: March 26, 2008
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: Dezincification Resistant Brass
Gasket:
EPDM, Peroxide Cured, Durometer
80
Maximum Pressure: 125 psi
Maximum Temperature: 220°F (104°C)
Product Information and Application Use
The Basic End Cap terminates the end of the TruFLOW™ Jr. Modular
Manifolds. Required gaskets and o-rings are included.
The Brass Manifold Loop End Cap closes off unused QS20 loop
connections.
9
Description
Part
Number
Length Height Depth Weight
Basic End Cap, R32
Brass Manifold Loop End Cap
Basic End Cap Gasket, spare part, R32
Brass Manifold Loop End Cap Gasket, spare part
A2080032
A2080020
A2400032
A2400020
2.13"
1.30"
1.58"
0.94"
2.13"
1.30"
1.58"
0.94"
0.625"
0.500"
0.125"
0.100"
0.25 lbs.
0.1 lbs.
.008 lbs.
.002 lbs.
Installation
The Basic End Cap threads onto one end of a brass manifold. The seal is aided by a gasket. Do not over-tighten. The Brass Manifold
Loop End Cap threads onto a brass manifold outlet. The seal is aided by a gasket. Do not over-tighten. For more information, refer to
the Uponor Radiant Installation Handbook. Available accessories: Basic End Cap Gasket, spare part (A2400032); Loop End Gasket,
spare part (A2400020)
Standards
ASTM F877
Codes
N/A
Listings
NSF-rfh; R20: ISO 228-G 1¾" B; R32: ISO 228-G 1¼" B
Related Applications Contact Information
Radiant Heating and Cooling Systems Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124
USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
655 Park Street
Regina, SK S4N 5N1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca