Operation Manual

PROGRAMMING

GROUPING

Instead of choosing channels one by one, you can group and

name different channels.(e.g. living-room, bedroom, hall, etc.)

This allows you to keep track of different receivers who you

would often use at the same time and select to turn all at once.

1) Select group number, for example group 1, by pressing

[GRP] [1]. Then scroll between the groups by pressing

[UP] or [DOWN]

2) Press [SET] to enter the group name. Use the number

keys to enter letters and [UP] and [DOWN] to move the

cursor. A maximum of 10 characters can be used.

3) Press [SET] to confirm the name.

4) Enter which channels should belong to the group,

for example channels 2, 3 and 8 by pressing the

corresponding number keys.