Operation Manual

24
PRODUCT INFORMATION
RECEIVER LOAD - Do not plug any device into the receiver which
exceeds it’s load capacity. This is unsafe and may overload the receiver.
RECEIVER SETUP - Do not interconnect the receivers. Never connect
one receiver to the other and do not put 2 receivers within 6 inches range.
INDOOR USE ONLY - The receivers are for indoor use only. Receivers
must not be exposed to temperature below 0°C or moisture.
REPAIRS - Do not open the receiver or remote control. If a product is
defective, return or exchange it at the store from which you purchased it.
CLEANING / ELECTRICITY SAFETY - Remove the receiver from the wall
socket, then clean it with a slightly damp cloth.
LOW BATTERIES - replace the batteries in the remote control when the
battery indicator shows they are empty or when the display appears faded.
TIMER PROGRAMS - if you have programmed the timer in the remote
control, the remote must be within the specified distance range of the
receiver, as it is the remote control that controls the receiver.