Operation Manual

22
ON/OFF RECEIVER (IKR202)
ON/OFF RECEIVER (figure 3 - DIAGRAM SECTION)
Installation:
1) Insert the on/off receiver in the outlet socket.
The main green light will be on whenever the
receiver is connected to a power supply.
2) Connect to a lamp(s) or another device to the receiver.
Manual on/off:
1) Press [ON/OFF] to switch the lamp on or off. The red
output light will be on whenever the receiver is plugged in
and connected to a lamp or another device.
Deactivate receiver reception:
1) To prevent the on/off receiver from receiving signals
from the remote control, press and hold down the
receiver’s [ON/OFF] key for 3 seconds.
2) To restore signal reception, press and hold down
the receiver’s [ON/OFF] key for 3 seconds again.
The symbol is shown on the receiver’s LCD display.