Operation Manual

21
DIMMER RECEIVER (IKR203)
Deactivate receiver reception:
1) To prevent the dimmer receiver from receiving signals
from the remote control, press and hold down the receiver’s
[ON/OFF] key for 3 seconds.
2) To restore signal reception, press and hold down the
receiver’s [ON/OFF] key for 3 seconds again.
The symbol is shown on the receiver’s LCD display.
Reset Receiver:
If the receiver’s LCD display is blank, or it does not react
when keys are pressed, the receiver may need to be reset.
Press the small [R] key on the receiver. The receiver will
temporarily shut off and all settings will go back to default.