Operation Manual

14
PROGRAMMING EXAMPLE
The example shows the following: Switch on a light
connected to receiver/channel 1 at 18.00 on Saturdays
and Sundays. Switch off the same light at clock 23.00
on Saturdays and Sundays.
Each ACTION (ON and OFF) requires a program, i.e. this
example will need two programs saved as PROG 01 and
PROG 02.
PROGRAM 1 - Switch ON:
[PROG]
[0],[1]
[1],[8],[0],[0]
[SET]
[DOWN] (repeatedly until S-S appears)
[SET]