Operation Manual

11
PROGRAMMING
DELAY SHUT OFF
The delay function switches off the chosen lights after
a predefined time period. Set by channel or by group.
CHANNEL(S):
1) Press [CH] then the number.
2) Press [FUNCTION] [2]
3) Enter the length of the delay time,
for example 15 minutes.
(NOTE: The time can be between 1-99 minutes.
Pressing any key again will deactivate the function.)
GROUP:
1) Press [GRP] then the number.
2) Press [FUNCTION] twice, then [2]
3) Enter the length of the delay time,
for example 15 minutes.
(NOTE: The time can be between 1-99 minutes.
Pressing any key again will deactivate the function.)
OFF: 15 MIN