Operation Manual

PROGRAMMING

GROUPING CONTINUED

5) Press [SET] to save the group.

You can edit the groups by carrying out

steps 1-5 to write over or change them.

CHOOSE GROUP

1) Select group number, for example, 1, by pressing [GRP] [1]

Scroll between the groups using [UP] or [DOWN]

RANDOM ON/OFF

This function switches chosen lights on and off at random

time intervals.

1) Select the channel(s) or group.

2) Press [FUNCTION] [3]. The function is

confirmed by the light being switched off if it was on or

switched on if it was off. An R on the LCD display on the

receiver indicates the function is active.

NOTE: The random function is deactivated if new commands

are sent to the chosen channel(s) using the remote control, by

pressing keys on the receiver, or if the receiver is removed from

the wall socket.