Operation Manual

BATTERIES

Your new energy meter comes with two button cell batteries already installed.

To begin operation, you must first remove the ribbon from the battery

compartment located at the back of the unit.

Carefully pull out the ribbon from

the battery compartment; this will

activate the batteries. Make sure

the batteries are inserted properly.

Ensure the two button cell batteries

are properly in place, then replace the

battery cover. (Be careful not to bend

any of the metal contacts)

To replace batteries that are

worn out, remove the battery cover.

Replace batteries as required to ensure the proper operation of this unit.

The batteries serve as a memory backup for the readouts and settings.

If the energy meter is not in use for an extended period of time it is

recommended to remove the batteries from the unit.