Operation Manual

14
Maximum load is the standard current level which your appliance is rated to
operate at. If an appliance is operating efficiently the max load should not be
exceeded. If an appliance is operating inefficiently power surges may occur in
which the maximum load is exceeded.
The user may set the maximum load value according the rating label on the
appliance, whenever this value is exceeded the "OVER LOAD WARNING"
symbol will flash. The symbol "OVERLOAD WARNING" will continue flashing
to indicate the overload condition has occurred.
Note: If "OVER LOAD WARNING" is displayed, unplug the appliance and press
MODE key to clear the warning. Check the MAX LOAD values and re-enter
them if they are incorrect. For example, the MAX LOAD setting may be set too
low causing the OVERLOAD warning to activate in error.
Please see next page for setting instructions.
MAX LOAD