Operation Manual

ENTER ONLY ONE PRICE /KWh
1) Press MODE for 3 seconds to enter the PRICE mode while viewing Volt,
Amp, Watt or KWh.
2) Press SET to begin entering price.
3) Press CHANGE to increase the number then press SET to move to next digit.
4) Once the last digit is entered, press SET again to make the decimal blink.
5) Press CHANGE to move decimal and SET to accept is position.
“ON TIME” and three dashes appears. Press MODE once to skip.
6) Press MODE for 3 seconds to exit the PRICE mode
ENTER PRICE 1/KWh AND PRICE 2/KWh (WITH START TIMES)
1) Press MODE for 3 seconds to enter the PRICE mode while viewing Volt,
Amp, Watt or KWh.
2) Press SET to begin entering price.
3) Press CHANGE to increase the number then press SET to move to next digit.
4) Once the last digit is entered, press SET again to make the decimal blink.
5) Press CHANGE to move decimal and SET to accept is position.
6) Three dashes and the "on time" symbol appears.
7) Press CHANGE to select the weekday (it will sequence between
each weekday, Monday to Friday, MO-SA, SA-SU, then all 7 days).
8) Press SET again, then press change to select the start time. (Eg. 7pm)
9) Press SET again, to end setting Price 1 and start time.
10) Press MODE to advance to Price 2 setting.
11) Repeat steps 3-7 to set Price 2.
12) Press mode for 3 seconds to exit the PRICE MODE.
12
PRICE MODE