Operation Manual

CLOCK SETTING

The energy meter must be in the Volt, Amp,

Watt or KWh mode to begin the clock setting

mode. The energy meter must not be in Max

Watt or Cost mode or the clock setting

function will not be available.

SET TIME

- Press SET to select the weekday and time.

- Press CHANGE to scroll to correct day,

hour and minute.

- Press SET between the weekday, hour and

minute setting to confirm each.

Time Setting Order:

(SET)gweekday will flash (CHANGE)g

(SET)ghour will flash (CHANGE)g

(SET)gminute will flash (CHANGE)g

(SET)

The final SET will exit clock setting mode, or if no key is pressed for 60

seconds normal display will return automatically.

12/24 HOUR CLOCK

The clock display may be set either 12 hour (AM/PM) or 24 hour (0-23) format.

To alternate from one format to the other, press CHANGE in Volt, Watt or KWh

mode; this will toggle between 12 and 24 hour display mode.

SET

CLOCK