Instructions / Assembly

Ax1 Bx1 Cx1 Dx1

Kx4 Lx1 Mx1Gx4 Ix4 Jx4

Ex4

Fx4 Hx4

READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY

1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.

2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.

3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.

4. WASHERS MUST BE USED.

5. WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.

6. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.

Install all the relevant screws,but do not tighten them completely at the very beginning.

Tighten the screws fully one by one.

Don't tighten up the screw before you start next mounting during the

installation.

MOOR ALU. PUMP SOFA W/SIDE PANEL

ASSEMBLY INSTRUCTIONS

PAGE 1
MOOR ALU. PUMP SOFA W/SIDE PANEL P ASSEMBLY INSTRUCTIONS READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY 1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. 2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR. 3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS. 4. WASHERS MUST BE USED. 5. WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT. 6.
PAGE 2
1 2 E H I J B G F M K L A 3 4 A C D C 5 D 2
PAGE 3
5 max 3 kg 6 CARE AND CLEANING: 1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS. 2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT IT CAN BE STORED IN A DRY AREA WITH A SUITABLE COVER BEFORE STORAGE,PLS INSURE IT IS CLEAN AND DRY. 3. IN THE EVENT OF BARE METAL SHOWING DUE TO SCRATCH,IT IS PREFERRED TO TREAT WITH A RUST REPELLING VARNISH OR SIMILAR. 4.