Instructions / Assembly
10
ASSEMBLY  INSTRUCTIONS
Step 4:
Locate the battery, remove the plastic Cove first. Unscrew the 
rubber cap of the Electric Ignitor, place a  AAA battery into the 
battery case. Make sure the positive pole ("+") towards the cap. 
Screw the cap back to the battery case tightly.
Step 5:
Place the glass stone averagely in the fire bowl on the top of the 
firebowl. 
NOTICE: * Do not place lava rocks on the screen.
* To ensure proper function, the Guard on the Burner should never 
have lava rocks covered over it.
Guard
DO NOT PLACE GLASS STONE ON THEGUARD. 
KEEP GUARD CLEAN.










