Instructions / Assembly

10
MAINTENANCE & STORAGE
To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities
on a regular basis:
NOTE:
In a salt-air environment (such as near to ocean), corrosion occurs more quickly than normal. Frequently check for corroded areas and repair them
promptly.
Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
Keep the heating item free and clear from combustible materials.
Visually inspect burner for obstructions and keep tank enclosure free and clear from debris.
Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner and pumice stones/lava rocks/Lava Glass completely cooled down.
Wipe down with a soft cloth.
Harsh weather conditions may cause stubborn stains, discoloration and possibly rust pitting.
Permanent damage may occur if powder or solvent comes in contact with painted or plastic components on this heating unit.
Keep the heating unit stored away from direct sunlight.
If storing this unit inside, disconnect the propane gas tank from the gas valve.
Not using manufacturer approved or supplied parts/accessories may result in a defective condition and void the warranty ofthis heating unit.
Always place lid (if applicable) or protective cover on heating item when not in use. Turn control knob OFF.
Before performing any maintenance always disconnect propanegas tank.