Setup guide

Upgrade vShield Endpoint
To upgrade vShield Endpoint from 5.0 to a later version, you must first upgrade vShield Manager, then
update vShield Endpoint on each host in your datacenter.
Procedure
1 Log in to the vSphere Client.
2 Select Inventory > Hosts and Clusters.
3 Select the host on which you want to upgrade vShield Endpoint.
4 Click the vShield tab.
The General tab displays each vShield component that is installed on the selected host and the available
version.
5 Select Update next to vShield Endpoint.
6 Select the vShield Endpoint check box.
7 Click Install.
Upgrade vShield Data Security
There is no change for vShield Data Security between 5.1.2 or later and 5.5.x.
Table 6‑1.
If your vShield Data Security version is Action
5.1.2 None required.
Prior to 5.1.2 Upgrade to version 5.1.2 or later by following the procedure below.
Procedure
1 Log in to the vSphere Client.
2 Go to Inventory > Hosts and Clusters.
3 Select the host on which you want to upgrade vShield Data Security.
The Summary tab displays each vShield component that is installed on the selected host and the
available release.
4 Select Update next to vShield Data Security.
5 Select the vShield Data Security checkbox.
6 Click Install.
vShield Installation and Upgrade Guide
46 VMware, Inc.