User guide

UPCOM TECHNOLOGIES
@BCL@1408FB8F 11
Temperature Compensation
Tighter temperature compensation response is also possible with the attenuator module
installed. There is no user control here, and the unit must have the requisite hardware option
installed, and be calibrated at the factory for this function to be active.
Communication Status (Optional )
The communication status between the software and the SSPA is reflected here. If there is a
problem here, double-check all serial port connections and ensure the correct Com port is
selected (the software uses the Select Port menu item).
Menu Items (Optional )
Under the File menu item, there is a set of calibration routines exposed to the user. These are
intended for factory use only. No support will be provided if any of these settings are adjusted.
Under the Select Port menu item, your appropriate Com port is selected for serial
communication to the SSPA.