User Manual

Manual Calibration
The 9 buttons represent platform
calibration point.
The dropdown menu beside the
button is for setting the leveling
compensation values. After chekc-
ing the leveling check box and click-
ing these buttons, the nozzle will
move to the corresponding posi-
tions and move up base on the com-
pensa- tion value.
Moves the platform up/down: click
the +/- buttons to move the platform
up and down.
For sending the platform to a specif-
ic height, input the value in the text
eld between + and - and then click
“Move” button.
Click "Set" button user want to save
currently platform height as nozzle
height.
So if user click the 9 buttons, the
printhead will move to correspond-
ing position and platform will move
to a height that equal to “value in the
text eld” + the “compensation value”
120.90
42