32" LCD TV UP STAR USA Group 1885 S Vineyard Ave, Ontario, CA 91761 Toll-free: 1-877-908-6777 Tel: 562-972-8098, Fax: 562-972-8068 E-mail: Sales@Upstarusa.com www.Upstarusa.com MODEL: P32ETW (Please read this manual carefully before operating the set And retain it for future reference.
Contents Important Safety Instructions ................................................................................. 1 WARNING........................................................................................................................ ..............1 Caution........................................................................................................................ ..................1 Important........................................................................................
Important Safety Instructions WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTRUE. Caution These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in The operating instructions, unless you are qualified to do so.
2) Keep these instructions. 3) Heed all instructions. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers Instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other Apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.
Batteries Installation of Remote-Control Unit 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the ‘+’ and ‘-’ ends of the batteries with the diagram inside the Compartment. 3. Replace the cover. Remove the batteries and store them in cool, dry place if you won’t be using the remote Control for a long time.
Screen 11 ON VGA IN Y OFF POWER TUNER HDMI1 IN HDMI2 HDMI3 PC AUDIO IN COAX BP Pr R L USB AUDIO AV IN R L Out 1 2 3 4 5 6 7 8 9 10 12 1 Power ON/OFF switch 7、8、9 2 Power in jack 10 USB in jack 3 COAX jack 11 Y, Pb, Pr and AUDIO (R/L) jack 4 TV jack 12 AV IN VIDEO and AUDIO (R/L) jack 5 PC jack 13 AUDIO out jack (R/L) 6 PC Audio in jack HDMI in jack The product color and shape may vary depending on the model.
CONNECTIONS Installing an Antenna For connecting to ATSC or NTSC broadcasts ON OFF POWER IN Press SOURCE button on the remote control to select TV, then press ► button to confirm. Then you can receive the ATSC/NTSC signal.
Satellite/Cable TV Set-Top Box To the Composite terminal In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate Receiver (SET-Top-Box) Terminals of other equipment By manufacturer and model. Y Pubic AV IN R Pr/Cr L R R (OUT) L L (OUT) Y Y Y Y AV Cable Connect the LCD TV’s Composite In terminal to the cable Receiver Composite Out Terming using the Composite cable.
DVD Connections Connecting to the Component terminal Connection terminals of other equipments differ by manufacturer and model. < DVD > Component connection cable Component Audio cable Y AV IN Pubic Y R Pr/Cr L R L R (OUT) Y BP Pr R L R L L (OUT) Y 1. Connect LCD TV’s Y, BP, Pr terminal to DVD’s Video Out terminal using the external cable. 2. Connect LCD TV’s Audio terminals (left & right) in AV1 to DVD’s Audio Out terminal using the Audio cable. 3.
PC Connections Connection terminals of other equipments differ by manufacturer and model. Analog RGB (D-Sub 15pin) Cable PC Audio Cable Connect LCD TV’s PC Input terminal to PC’s RGB terminal using the D-Sub cable. Connect LCD TV’s PC Audio terminal to PC’s Audio terminal using the Audio cable. (Only for PC’s with Audio terminal) How to Use as PC monitor 1. Turn on the LCD TV and press SOURCE button on the remote control. 2. Use ▲/▼ to move to “VGA”.
Basic Use Powering the LCD TV Power ON/OFF To turn the LCD TV on: Press the “POWER” button. To turn the LCD TV off: Press the “POWER” button on the LCD TV. To turn ON or OFF by remote control: Press the “POWER” button of the remote control. Selecting Input Source You can select between the TV signal and the input signal of other equipments Connected to the TV. Use this function to switch to the input source you wish to view. Press INPUT button on the remote control.
Application Operating the Menu 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control, the on-screen menu will appear on the Screen. 3. Use the ◄/► buttons to select your main menu option. PICTURE MENU: Allows you to make adjustments your picture settings.
Parental Control MENU: Set program rating control and input source, keypad lock function. V-CHIP Change Password Keypad Lock Source Lock 0-9 SETUP MENU: Select closed caption options, language and time. ：Move OTHERS MENU: Set the OSD blue background, whether auto power of no signal or no operation, clear All user settings etc. ：Move 4. Use the ▲/▼ buttons to select an option of the sub-menu, and press the ► button. While in adjustment mode, use the ◄/► button to change the value of the item. 5.
PICTURE MENU Picture Settings Screen Size Wide PC Settings Color Temperature Normal Advanced Picture Settings Move ▲ Press ▼/▲ to highlight one of the following options, and then press ENTER or to enter next subMenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous menu. Picture Settings Adjust the picture quality including brightness, contrast, color, tint, Sharpness. For details. Press / To select the display aspect ratio till the picture is at onto the screen.
PICTURE MENU/ PICTURE Settings : Return : M over When Picture Mode is set to User, the following settings can be manually adjusted. Press PMODE shortcut button on the remote control to select picture mode directly. Adjusting the values Picture Mode Highlight the item and Press ◄/► to select. Movie/Dynamic/Standard/User Brightness/Contrast/Color/Tint/Sharpness ► And a process bar Appears, then press ◄/► to adjust the value. Tint is Available when analog TV or NTSC-system AV or S video.
PICTURE MENU/ PC Settings : PC Settings Menu is available only in PC DB15 or DVI mode. When DVI signal input, only Horizontal Position and Vertical Position can be adjusted. Press ▼/▲ to highlight one of the following options, and then press ENTER to select it. Auto Adjust Automatically adjusts Clock, Phase, H-Position and V-Position settings. In order to get a good result, you should open a fling the screen picture before executing Auto Adjust.
PICTURE MENU/ Advanced Picture Settings : Move Press ▼/▲ to highlight the item and press ENTER or ►to display the sub-menu as following. Dynamic Contrast Of/Low/Medium/High The system will adjust the luminance curve by analyzing the picture content dynamically. Film Mode OFF / ON For the 2:2 or 3:2 format signal of cinema, enable special pixel process to reduce the hick of moving Area. Noise Reduction Of/Low/Medium/High You can clear up analog TV signal by reducing the dot noise.
SOUND MENU Sound Settings Surround Mode AVL Analog Sound Digital Sound Digital Audio Output PCM Equalizer Settings : Move Sound Settings Surround Mode Set the sound mode, and Bass /Treble/Balance. Set to enjoy the virtual surround sound. Press ENTER to set or cancel. AVL Auto Volume Level. Press ENTER to set or cancel. When AVL is set on, it will limit the Sound being heard when sudden changes in volume occur during commercial breaks or Channel changes. Usually be enabled at night.
SOUND MENU/ Sound Settings SOUND SETTINGS : Move Sound Mode Standard/Dynamic/Soft/User Only in User mode, the follow items can be adjusted. Bass Adjust the low frequency band response. Treble adjust the high frequency band response. Balance Adjust the level of sound coming from the left or right speaker. Adjust the Bass/Treble/Balance 1 Set Sound Mode to User. 2 Highlight the item and press ◄/► to display The sub-menu, then press ◄/► to adjust the value.
SOUND MENU/ Equalizer Settings Mode Pop : Move Mode OFF/Rock/Pop/Jazz/User (only in User mode, the following can be manually adjusted.) Adjust Equalizer Settings Based on your favorites about which frequency band need to be adjusted, make small Adjustment with certain frequency band at a time. Suggest NOT making too large changes. 1 Set Mode to User. 2 Press ▼ to select the rest (100Hz) item, then press ◄/► to select the band to be turned. 3 Press ▼/▲ to adjust the value.
Channel MENU Channel Settings : Move Note: The menu is available only at TV source. Channel List You can view all the channels and choose one quickly. For details of setting. Favorite List all of you favorite channels are listed in this menu and you can choose them Quickly. For details of setting. Channel Setting Set the favorite channels, skipped channels, label of channels. Signal Type Set to Air or Cable according to your antenna source. When set to Air, TV can catch 8VSB broadcasting signal.
Channel MENU/ Channel List D10-1 ABC A51 A52 A53 : Move “ABC”: Label of the Channel. Press ▼/▲ to highlight a channel and press ENTER to view it. Channel MENU/ Favorite List The list shows channels that you set as favorite. See” Channel Settings” on page 17 to understand how to set channels be favorite.
Channel MENU/Auto Channel Search : Stop Auto Channel Search : Skip It will search analog channels rest, then digital channels. Before execute auto channel search, please contra your antenna type is Air or Cable. Wrong setting of Signal Type maybe because ending no channel. Found numbers do not Include encryption programs.
Channel MENU/Channel Settings CHANNEL SETTINGS Channel Skip Favorite Label ABC D10-1 A51 A52 A53 : Cursor/Page Skip Set the channel to be skipped when using CH+/Ch- to view channels. Favorite Set the channel to your favorite list. Label Rename label of the channel. Change the settings Skip & Favorite 1 Press ▼/▲ to select the channel you want to set. 2 Press ◄/► to highlight corresponding item, and press ENTER to set or cancel.
PARENTAL CONTROL MENU V-CHIP Change Password Keypad Lock Source Lock 0-9 ：Enter Password Note: The default user password is “0000”, and if forget what you set, try“1470”. Lock Parental Control The following items are only available if the password input Is correct. V-CHIP Include below settings: US V-Chip Rating system used at USA. Canada V-Chip Rating system used at Canada. Block Unrated Show Control whether locks the program that have not any valid rating bag.
PARENTAL CONTROL MENU/ Lock Parental Control Settings ▲ Press ▼/▲ to highlight one of the following options, and then press ENTER or to enter next subMenu to adjust it. Press EXIT to clear on-screen menu or MENU back to the previous menu. How to access to hotel menu 1、Press the menu button on the remote control, the main menu will display. 2、Choosing“PARENTAL”, look for and select“Lock Parental Control” option .
PARENTAL CONTROL MENU/ Hotel Lock Settings HOTEL SETTING Boot Setting Hotel Lock Setting Power Save Off Export Setting Execute Import Setting Execute Reset Hotel Setting Execute ：Move A. Tuner Lock: Press▲▼ to select tune to lock, then press ENTER to set it to lock. Moreover, it could not search the Channel, .but change available channel. B. Key Padlock Press ▲▼ to select keypad if you want to lock, and then press ENTER to set it to lock.
PARENTAL CONTROL MENU/US V-CHIP For the United States, the rating setting basically include the following options: Movie Rating, TV Rating. PARENTAL CONTROL MENU/ Movie Rating This system defines the rating controls which come from MPAA rules : Move Rating define PG-13 General audience. All ages admitted. Parental guidance suggested. Some material may not be suitable for children. R Parents strongly cautioned. Some material may be inappropriate for children under 13. NC-17 Restricted.
PARENTAL CONTROL MENU/ TV Rating The TV ratings compose of two aspects: age-based and content-based. : Move Deane Content Define TV-Y General audience FV Fantasy violence TV-Y7 Parental guidance suggested D Suggestive dialogue TV-G Parents strongly cautioned L Strong language TV-PG Retracted S Sexual situations TV-14 No one 17 and under admitted V Violence TV-MA Adult audience only Age Note: The content ratings will increase depending on the level of the age-based rating.
PARENTAL CONTROL MENU/ Canada V-CHIP For Canada, the rating settings include the following options: English Rating, French Rating. English Rating These ratings are for programs which are using English rating system. Rating Defined as C Children C8+ Children 8 years and older G General programming ENGLISH RATING C C8+ G PG PG Parental guidance 14+ 14+ Viewers 14 and older 18+ 18+ Adult programming : Move French Rating The ratings are for programs which are using French rating system.
PARENTAL CONTROL MENU/ Change Password 0-9 : Enter Password At rest you should enter the correct old password then enter new password twice. If you lost your password, try to enter “1470". Source Lock Press ▼/▲ to select the source you want to lock, and then press ENTER to set it to lock. If anyone Want to use this source, the password is needed.
SETUP MENU : Move Closed Caption (CC) Include below options: Caption Display or hide the CC. Analog Caption Type Select from below closed-caption modes for analog programs. CC1, 2, 3, 4 displays corresponding caption channel of an analog program. (Usually be set to CC1 For most programs.) Text1, 2, 3, 4 displays corresponding text service channel of an analog program. Digital Caption Type Applies only to digital channels with closed caption. Service1, 2, 3,4,5,6 these are deferent service data channels.
SETUP MENU/ Digital CC Style CC Size Small CC Font Style4 CC Opacity Solid Text Color Red CC Background Opacity CC Background Color Transparent Default CLOSED CAPTION : Return : Move This menu is valid only for digital closed caption of digital channels.
SETUP MENU/ Clock Daylight Saving Time : Return ： Move : Return Time Zone Hawaii/Alaska /Pacific / Central/Mountain/ Eastern/ Samoa/Newfoundland Auto Clock If set it to ON, the TV will sync the local clock according to the DTV broadcasting time Automatically. Otherwise you can set the time manually. Setup Time Set Auto Clock to of, then you can set the time manually. Note: In the case of loss of power, the clock setting will be lost.
Others MENU : Move Blue Back Set the screen background color blue or not when no valid signal input. When analog TV input and has no signal, snow noise will display if this option is cleared. If it is set, TV will automatically enter standby after 10 minutes No Signal Power OFF Without signal input. No Operation Power OFF If it is set, TV will automatically enter standby after 3 hours Without any operation.
PC Mode Setting up your PC software (based on Windows XP) The Windows display-settings for a typical computer are shown below. But the actual screen on Your PC will probably be deferent, depending upon your particular version of Windows and your Particular video card. But even if your actual screen looks deferent, the same, basic set-up Information will apply in almost all cases. 1. First, click on “Control Panel” on the Windows start menu. 2.
Trouble shooting Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your LCD TV, please take the following steps rest. If you still have the problem, turn the power OFF and contact your dealer or an authorized Service center. Problem Action The screen does not Is the power plug pulled out? Insert the power plug. Appear. Press the power button of the remote control.
Specifications Model LCD Panel P32ETW Panel Size 32” Widescreen TFT LCD Resolution 1366×768 Pixel Number of Colors 16.
Up star USA Group Limited Warranty for LED & LCD TVs. Upstar & Tanpo LCD/LED TV products are accompanying Upstar USA Group’s warranty It cover to the original purchaser of a new product against defects in materials and workmanship for a period of One (1) year of non-commercial usage And ninety (90) days of commercial use. If the unit exhibits a defect in normal use within the warranty period, Upstar USA Group, will, at its sole option, either repair or replace it. .
Failure of owner to perform periodic product maintenance as stated in User 10. Guide, such as cleaning of user-cleanable projector filters. 11. Any other cause which does not relate to a product defect. 12. Damage caused by static (non-moving) images displayed for lengthy periods of 13. Damage to, or abuse of, the coating on the surface of the display through Time (also referred to as image burn-in). Inappropriate cleaning as described in product User Guide. 3.
For Warranty, Technical Support, Customer Service, Missing or Defective Parts, please call: 1-877-908-6777 or write to: Up star USA Group 1885 S, Vineyard Ave Ste 1 Ontario, CA 91761 www.Upstarusa.com Useful Information about: (1) Technical support, Parts/Accessories, email to: RMA@upstarusa.com (2) Warranty Service and/or replacement, email to: Customerservice@upstarusa.
Up star Warranty Registration Card Up star will register this warranty upon receipt of your Warranty Registration Card & a Copy of your purchase' receipt From one of retail locations as proof of purchase. Please submit your Warranty Registration Card & your receipt within Thirty (30) days of the date of purchase To: Up star /Warranty Registration Dept., 1885 S. Vineyard Ave, Ste 1 Ontario, CA 91761 This warranty is Valid in the United States only.
