User's Manual

Page28
The default for this option is OFF. If you want to
change this, Press the ▼ button to highlight the
Over Write option and then press the ► button to
toggle the setting to ON. Press OK to save the
setting.
If you have a new SD card, you should always
format the card before you use it in the camera. To
format the SD card, press the ▼ button until the
Format option is highlighted. Press the OK button.
You will see a screen that has YES and NO on it, use
the ► button to navigate to YES and press OK.
Formatting the SD card:
Turn the camera onto the setup mode. Press the
menu button, then ►button 3 times to highlight
the SYS tab.
Navigate down by pressing the ▼ button
repeatedly until the FORMAT option is highlighted
and press OK. You will see the screen shots shown
below (Figure 18 & 19). Press the ◄ button to