User's Manual

Page22
the time option you want, press OK to save the
setting. The camera will continuously take photos in
timed increments you set. Remember, this will
generate a lot of photos and you may want to limit
the number of photos being sent.
START-STOP: If you only want your camera to be
on during part of the day each day you can set the
Start-Stop function. The Blackhawk has a dual start-
stop option. Press the ▲ and ▼ buttons to
highlight the Start-Stop option. The default setting
is OFF. Press the ► button to toggle the setting to
ON and press OK. See Fig 13 & 14 below.
Figure 13
Figure 14