Instructions / Assembly
Table Of Contents
www.ihomeangel.com Page: - 3 - / 4
5. Make wire connections
Connect wires as below wires connection shown. PLEASE NOTE THAT GROUND WIRE IS BARE COPPER WIRE, NEVER
CONNECT OTHER WIRES TO GROUND WIRES.
Connect ground wires according to the below chart Connect wires according to the below chart
Twist wires together with plastic wire connector until tightly joined, and wrap each connector with approved
electrical tape. Be sure that no wire strands are exposed and then carefully tuck all wires into the outlet box.
4. Place the glass (G) and tube (H) in position, and attach the glass (G) to the tube
(H) with threaded balls (F) and plastic washers (I).
support@uolfinhome.com
4. Attach the mounting plate assembly (A) to outlet box with mounting screws (C).
Carefully pass the supply wires through the mounting plate assembly (A).