Instructions / Assembly
Table Of Contents
Page: - 2 - / 4
TOOLS REQUIRED (NOT INCLUDED):
Before starting assembly and installation please prepare the needed tools as below picture
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate assembly (1)
(B) Green ground screw (1)
(E) Back plate (1)
(F) Threaded ball (4)
(G) Glass (1)
(H) Tube (1)
(I) Plastic washer (2)
ACCESSORIES & QTY ENCLOSED:
(C) Mounting screw (2)
(D) Plastic Wire Connector (3)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the
above illustration.
2. Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity until the work is
done.
A) Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position.
B) Place the wall switch in the “OFF” position.
3. Unscrew the threaded balls (F) from the back plate (E),
then carefully remove the mounting plate assembly (A).
support@uolfinhome.com