Instructions / Assembly

[e-mail]
Page:  2  / 3
PARTS INCLUDING:
(C) Green ground screw (1)
(D) Mounting plate (1)
(E) Back plate (1)
(F) Knob nut (2)
(G) Socket (1)
(H) Wire cage (1)
(I) Glass shade (1)
(J) Socket ring (1)
ACCESSORIES ENCLOSED:
(A) Mounting screw (2)
(B) Plastic wire connector (3)
ASSEMBLY & INSTALLATION
INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration.
2. Turn off power
Before you start the installation, NEVER attempt any work without shutting off the
electricity until the work is done.
A) Go to the main fuse, or circuit breaker, box in your home. Place the main power switch
in the “OFF” position.
B) Place the wall switch in the “OFF” position.
3. Make assembly
Step A1: Unscrew knob nuts (F) from back plate (E), then set them aside for later installation.