Instructions / Assembly

Page: - 4 - / 5
A
GREEN GROUND
SCREW
Step A4 » Align the holes in back plate (E) and mounting plate (C), then secure them with the previously
removed studs (F).
Step A5 » 1) Carefully place glass shades (I) on sockets (H), then secure them with iron bars (G).
2) Install bulbs (Not included) (Please do not exceed the maximum wattage recommended on the
socket.)
NOTE: It is normal for the arms attached to the fixture body to loosen slightly
during shipment and handling.
To solve this problem, use Allen wrench (J) to tighten the screws in the arms
as shown in the illustration.
ORDERING PARTS
Keep this sheet for future reference in case you need
to order replacement parts. All parts for this fixture can
be ordered from the place of purchase. Be sure to use
exact wording from illustration when ordering parts.
CLEANING
To clean, wipe the fixture with a soft cloth. Clean glass
with a mild cleaner (such as mild and non-abrasive
soap). Do not use abrasive materials such as scouring
pads or powders, steel wool or abrasive paper.