Instructions / Assembly

Page: - 3 - / 5
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration.
2. Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity
until the work is done.
» Go to the main fuse, or circuit breaker, box in your
home. Place the main power switch in the “OFF”
position. » Place the wall switch in the “OFF” position.
Step A1 » Unscrew studs (F) from back plate (E), then set them aside for later installation.
Step A2 » Carefully pass the supply wires from the outlet box through mounting plate (C).
Secure mounting plate (C) to the outlet box with mounting screws (A).
Step A3 » Make wire connections
Connect wires as below wires connection shown. PLEASE NOTE THAT GROUND WIRE IS
BARE COPPER WIRE, NEVER CONNECT OTHER WIRES TO GROUND WIRES.