Operation Manual

UNO
X
R
4. DIFFERENT FUNCTIONS ( SET UP ONLY IN
OVENS WITH Classic, Dynamic and 800
Manual CONTROL BOARD )
OVEN DOOR MANAGEMENT
On each appliance there is a switch that stops the
functioning of the oven when you open the door.
When you open the door, the cooking cycle (both
in the manual and in the programmed mode) goes
into a pause (no parameter is lost). When you close
the door, the cooking cycle starts again from where
it stopped.
FUNCTIONING CYCLE OF FANS
Every 2 minutes the fans stop and reverse their
direction of rotation.
5. CLEANING
WARNING:
Before starting any maintenance or cleaning
operation it is necessary to disconnect the electrical
power supply and wait for the appliance to cool
down.
5.1 FIRST USE OF THE OVEN
Before the first use of the appliance: clean the
metal part with hot water and soap and rinse it.
Never wash the inner part of the oven with acids or
aggressive detergents.
With the empty cavity, heat the oven up for about 30
minutes at a temperature of 200°C to eliminate any
thermic insulation smell.
5.2 CAVITY CLEANING
At the end of each cooking cycle, clean the cavity
using only proper products.
Never clean the stainless steel with acids, aggressive
detergents or other product containing chlorine
(sodic hypochlorite, hydrochloric acid, etc.), even
though they are diluted.
5.3 CLEANING OF THE EXTERNAL PART OF THE
OVEN
Never use a jet of water in pressure to clean the
external part of the oven. Only use wet clothes.
6. TURNING OFF IN CASE OF BREAKDOWN
If there is a breakdown, deactivate the appliance:
- disconnect the electrical power supply
automatic circuit breaker placed upstream
from the appliance.
- consult a technical service center authorized
by the manufacturer where you can find
trained personnel.
III. COOKING PRINCIPLES
1. COOKING TYPOLOGIES
The types of cooking you can realize with the
appliance described on this manual are:
• Bread and Pastry professional baking with:
1. CONVECTION
the baking is realized through hot air.
2. CONVECTION + HUMIDITY
(Humidity Versions)
the baking is realized through hot air with
the addition of humidity.
1.1 MAIN COOKING MODES
Warning:
a- Before any use, heat up the oven setting
a cavity temperature 30°C higher than the
desired cooking temperature. This allows
you to obtain the best baking uniformity.
b- Use of higher temperatures than those
needed by the product causes an uneven
baking.
c- Bread and Pastry baking: do not use trays
with a height of more than 20 mm and
avoid that the single units on the tray get in
touch.
d- Do not overload the trays.
Convection cooking
In convection ovens the cooking is done by hot air
that circulates round and round inside the cooking
chamber. This allows to realize an even cooking,
also because in this way the heat is homogeneously
distributed.
An even baking is guaranteed also when the oven
is fully loaded. The food is perfectly baked both on
the surface , with a golden crust, and in the internal
part, with a uniform structure and a constant
residual humidity.
The main advantage is the possibility to cook
at the same time different types of food without
ENGLISH
ENGLISH
11