Instruction manual XP 596.042 - 596.047 - 596.052 - 596.057 596.040 - 596.045 - 596.050 - 596.
InTroduCTIon _____________________________________3 ExplanaTIon of pICTograms ______________________4 safETy rEgulaTIons ______________________________5 InsTruCTIons for THE InsTallEr _____________________7 InsTruCTIons for THE usEr __________________________14 The company reserves the right to apply improvement modifications to appliances and accessories at any time without advance notice.
SpidoCook™ INTROduCTION dear Customer, We would like to congratulate and thank you for choosing to purchase an appliance in the SpidoCook™ range by unox; we hope this is just the beginning of a fruitful and long-lasting partnership. as you are aware, the SpidoCook™ range of grills, are equipped with the SHB system for contact and infrared cooking, and ultra-rapid and uniform heating hobs.
Explanation of pictograms danger! situation presenting immediate danger, or a hazardous situation which could cause injury or death.
SpidoCook™ Safety regulations Safety regulations for installation and maintenance • Read this guide carefully before installing or maintaining the appliance, and conserve this guide with care for any future consultation of users. • All installation, assembly and non-routine maintenance operations must be performed exclusively by qualified technicians that are authorised by uNOX, in compliance with the regulations in force in the user country and with respect to the regulations on systems and work safety.
Failure to observe these regulations may cause damage or (fatal) injuries, and also invalidates the guarantee. • To ensure that the appliance is in perfect use and in a safe condition, maintenance and inspections should be performed yearly by an authorised customer service agent. • Do not use the contact grills SpidoCook™ by unox to heat pots or pans • Should not be placed on the glass ceramic surfaces aluminum foil or plastic containers. do not install the appliance near flammable materials.
INSTRuCTIONS FOR THE INSTALLER Contents Trasporting and unpacking _________________________________________________________________ 8 getting started ___________________________________________________________________________ 9 Checking package contents ______________________________________________________________ 9 removing the protective film_____________________________________________________________ 9 fat collection drawer positioning _________________________________________________________ 9 positio
Before installing the appliance carefully read chapter “safety regulations” (page 5). During installation, wear appropriate protective clothing (protective footwear, gloves, etc.). Trasporting and unpacking make sure that the appliance is not in danger of tipping over during transportation. Check the package on recept for any visible damage. If damage is found, immediatly contact unox and do noT install the appliance.
SpidoCook™ Getting started Checking package contents Before installing the appliance, check that the following packaged components are present and free of damage: - SpidoCook™ grills - technical documents (use and installation manual, “technical specifications” sheet); - scraper; - brass scourer.
Positioning Characteristics of the installation area Max 35°C Max 70% Min 5°C Install the appliance in areas: - dedicated and conforming to the cooking of industrial foods; - having adequate air ventilation; - that comply with the local laws and recommendations; - protected against the weather; - with temperatures between +5° to +35°C maximum; - having a maximum humidity of 70%. do not install the appliance near other appliances that reach high temperatures in order to avoid damaging electrical parts.
SpidoCook™ Appliance distances mi 5 cn. m n. mi m c 5 n. mi m 5c position the appliance respecting the indicated distances in the diagram and so that the back of the oven is easily accessible for appliance connections and maintenance. do not install the appliance near inflammable or heat sensitive materials, walls or furniture. Otherwise, protect them with appropriate non inflammable materials in compliance with fire prevention regulations. FLAMEPROOF PANEL m 5 cin. m m 70 in. cm n. micm 5 4 n.
Electrical connections Before installing the appliance carefully read chapter “safety regulations“ (page 5). Connections to the main power and the electrical system must comply with the regulations in force in the country of installation of the appliance; and all connections must be performed by qualified installer authorised by uNOX. Failure to comply with these regulations may cause damage and injuries, invalidates the guarantee and relieves uNOX of all liabilities.
SpidoCook™ for proper electrical connections, the appliance must: - Be wired into an equipotential system in accordance with current regulations. This connection must be performed between different appliances with the terminal marked with the equipotential symbol . The wire must have a maximum cross-section of 10 mm2 (according to IEC EN 60335-2-42:2003-09 standard) and be yellow-green. to the earthing (green-yellow wire).
INSTRuCTIONS FOR THE uSER Contents general appliance operating instructions_____________________________________________________ 15 manual control operation _________________________________________________________________ 15 spidoTouch digital control operation ________________________________________________________ 16 Oven-user communication (only for models with digital control) __________________________________ 17 routine maintenance ___________________________________________________________________
SpidoCook™ INSTRuCTIONS FOR THE uSER Before using the appliance: - make sure that you have a system conformity and use permit certificate that is issued by a uNOX authorised installer; - carefully read chapter “safety regulations“ (page 5.
SpidoTouch digital control operation Control Panel: Power switch (A) activates the unit. Button located outside: contact grill off Button located inside: contact grill on SpidoTouch digital control (B) allows you to set the cooking time and temperature and store up to 4 programmes. Temperature light (C) light on: Heat is on. light off: set temperature reached A C B D1 D3 D2 Time and cooking temperature parameter setting temperature (max. 300°C) Time 0 = STOP (grill OFF) 00:01....
SpidoCook™ USING A PROGRAMME To start one of four programs from the state “STOP” (0- grill OFF) or “INFINITY” (INF - plate continuously on) push P1, P2, P3 or P4. At the end of the program will be restored the initial state (STOP o INFINITY). In case the user start a program the cooking time can be stopped press the key by taking the time to zero or by pushing the button of the program in use.
Routine maintenance Any routine maintenance procedure must be performed: - after disconnecting the appliance from the power supplies; - after having put on the proper personal protection equipment (i.e. gloves, etc...). Clean the grill daily to maintain proper levels of hygiene. When cleaning any component or accessory nEVEr use: - abrasive or powder detergents; - aggressive or corrosive detergents (i.e. hydrochloric/muriatic or sulphuric acid).
SpidoCook™ Inactivity follow the precautions below during inactivity: - disconnect the power supplies to the appliance; - we recommend rubbing a soft cloth lightly doused with mineral oil on all stainless steel surfaces.
After-sales assistance In case of any malfunctions, disconnect the appliance from its power and contact a unox authorised technical customer service. provide the following information: - the date of purchase; - the appliance data on the serial plate. Manufacturer’s information: unox s.p.a. Via majorana, 22 35010 Cadoneghe (PD) Italy Tel +39 049 86.57.511 - Fax +39 049 86.57.555 info@unox.com www.unox.
SpidoCook™ Certification Eu declaration of conformity for electrical appliances manufacturer: unox s.p.a.
International B.V. Groot Mijdrechtstraat 42 Postbus 32 3640 AA Mijdrecht +31 (0)297-282341 +31(0)297-287405 SPIDOCOOK en ma 2014 www.emga.com info@emga.com www.unox.
