User manual

Housing parts

29. Thoroughly clean all parts with

warm water and a mild washing-

up liquid, then dry all parts tho-

roughly.

Storage

30. Store all parts in a dry, dust-free

and clean location. Tip: Keep the

appliance packaging and store

the soft ice cream machine in

this box when the soft ice cream

machine is not in use.

TROUBLESHOOTING

Problem Solution

Odour May occur with the first use of the appliance.

If the odour should continue to occur after the appli-

ance is used several times, contact the customer ser-

vice department.

The mixer does not

turn

Check whether the appliance is connected to a func-

tioning electrical outlet as specified on the rating pla-

te, and is switched on.

If the ice cream mixture has become too solid, the

mixer stops turning. Switch off the appliance. Re-

move the motor, lid and mixer and let the ice cream

thaw slightly. Remove it, e.g. with a plastic spatula.

The motor is overheated and has been switched off

automatically by the overheating protection circuit.

Unplug the power plug and allow the appliance to

cool. Remove the motor, lid and mixer and let the ice

cream thaw slightly. Remove it, e.g. with a plastic

spatula.

If none of the causes cited apply, contact our custo-

mer service department.

The ice cream mix-

ture

does not reach

the desired consis-

tency

Check all recipe ingredients, mix them and ensure

that they are adequately pre-cooled.

If you are using alcohol, only add it to the ice cream

mixture when it has already reached the desired con-

sistency. If you add the alcohol too soon, it prevents

the ice cream mixture from solidifying.