Technical data

22
can accumulate in the glass pot.
This is due to the technology and
is not a defect of the appliance.
7. Close the swivel arm with light
pressure.
8. Place the glass pot with the lid
closed on the warming plate.
9. Remove the lid of the bean con-
tainer. Fill the coffee beans into
the bean container.
10. Note that the bean container must
always be at least half full. The fill
quantity is 200 g.
11. Do not overfill the bean container,
this can damage the grinder.
12. Close the bean container with the
lid. Note that the appliance does
not detect that there are no beans
in the container.
13. Select the desired number of cups
by pressing the button „2-12
Tassen“ (“2-12 cups”) until the
desired number of cups is illumi-
nated. You can select 2, 4, 6, 8,
10 and 12 cups. Ensure that you
have selected the precise number
of cups for which you have also
filled water into the appliance. If
you fill in water for two cups, you
must select two cups, if you fill
in water for four cups, you must
select four cups, etc. This is the
only way to ensure optimal coffee
flavour. The coffeemaker grinds
the precise amount of coffee pow-
der for the number of cups that
has been set.
14. Now you can select the desired
strength of the coffee with the
„STÄRKE“ (“STRENGTH”) but-
ton.
15. If desired you can also brew cof-
fee from coffee powder. For this,
press the button „MÜHLE AUS“
(“MILL OFF”). The background
lighting of the button will be
illuminated blue, as long as the
button is active. As soon as you
conclude the brewing process, the
button „MÜHLE AUS“. (“MILL
OFF”) will be automatically deac-
tivated.
16. Now fill the desired amount of
coffee powder into the perma-
nent filter, to taste, per cup, 5-7 g
(approx. 1 measuring spoon) cof-
fee powder ground medium fine.
Coffee that is ground too fine can
clog the pores in the filter, which
can cause the coffeemaker to
overflow.
17. Press the „EIN/AUS“, (“ON/
OFF”) button and the appliance
will start to brew coffee.
18. During the brewing process the
word, “Brewing”, will be shown in
the display.
19. You can remove the pot at any
time during the brewing process.
The drip stop prevents residual
coffee from dripping out of the
filter. Put the pot back under the
filter within 30 seconds, so that
the filter does not overflow.
20. When the appliance is finished
brewing coffee, this is indicated
by a signal tone.
21. The warming plate remains swit-
ched on as long as the coffee-
maker is switched on, in order
to keep the coffee remaining in
the pot warm. After two hours
the appliance automatically swit-
ches off. If you do not want the
warming function, switch off the
appliance with the „EIN/AUS“,
(“ON/OFF”) button.
22. After pouring out all of the coffee
and emptying the pot completely,
do not place the empty coffee pot
on the hot warming plate.
23. Remove the permanent filter and
dispose of the coffee grounds.