Parts and Instruction Manual MRS-6 Maxi-Guard II Mercury Vacuum
This manual is furnished with each new MINUTEMAN MRS-6. This provides the necessary operating and preventive maintenance instructions. Operators must read and understand this manual before operating or servicing this machine. This machine was designed to give you excellent performance and efficiency. For best results and minimal cost, please follow the general guidelines below: · Operate the machine with reasonable care.
Table of Contents Inspection ............................................................................................................................................ 1 Electrical .............................................................................................................................................. 1 Grounding Instructions ...................................................................................................................... 1 Extension Cords ........................
Inspection Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly inspected before shipment and any damage is the responsibility of the delivering carrier who should be notified immediately. Read all instructions carefully before operating. WARNING Electrical shock could occur if used on wet surfaces. Do not expose to rain. Store indoors. Electrical motors can cause explosions when operated near explosive materials or vapors.
Operating and Filter Care Instructions (Refer to “Main Assembly”) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Tank assembly is equipped with low intake on outside and 2" tube inside. Carefully open the folds of the disposable collector bag No. 3 and insert into tank. Place the cardboard collar onto the intake tube and carefully pull the collar over the tube until the rubber gasket is past the ring on the end of the tube. Place the charcoal filter holder assembly No.
Exploded Views Main Assembly Parts and Instruction Manual Page 3
Lid Assembly Parts and Instruction Manual Page 4
Lid Assembly BOM Item 1 2 3 3A 4 5 6 7 7A 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 *** *** Part No 750415 750000 380001-4 380054 380063POL 750553 381020 380005 380028 380002 101020 711556 380004 380064 290017 130040POL 380044 380040 380061 380037 710360 710353 711310 711543 762037PTD 762035PTD 750555 805042 762141 710357 711543 711202 389120 389220 Parts and Instruction Manual Qty 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 4 4 4 1 4 5 1 1 1 1 1 1 1 2 1 1 Description Dome Assembly Mot
Tank Assembly Item 1 2 3 4 5 6 7 8 9 10 10A *** *** Part No Qty 390087 1 500033 1 711503 4 711915 4 712638 2 712824 2 750118 1 761054 2 900039 1 900093 1 900092 1 384003PKG 1 762237PKG 1 Parts and Instruction Manual Description Gasket Knob Washer - Flat #10 Rivet .19 X .28 X .37 HD STNI Nut-Hex 10-24 SS Nyloc SCR-THMS 10-24 X .75 SS Intake Tube Assembly Latch Intake Tank, 6 Gal. SS Low Intake Tank, 6 Gal.
Minuteman International Made Simple Commercial Limited Warranty Minuteman International, Inc. warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Minuteman will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals.
