Your new water purifier THANK YOU for entrusting us to supply your new water purifier. We are confident it will provide you with many years of trouble-free use. The advantages of the water purifier include: ● ● ● ● ● ● ● ● high capacity direct flow continuous measurement of the water quality no water tank needed no chemicals added high purification level simple installation and easy maintenance attractive and compact design To avoid problems, it is important for you to read the user instructions.
Contents For the user For the installer Safety information 4-5 - Installation - Child safety - Use - Waste management 4 4 4 5 Information - Consumables - Extra accessories - Facts about reverse osmosis - Unpacking - Positioning the water purifier - Installing the pure water faucet - Water connection - Electrical connection - Connecting the water purifier - Flushing - Moving the water purifier 5 5 5 6 Using the water purifier 7 - Production of pure water 7 - Replacing the filter - Descaling - D
Safety information Carefully read the user instructions, which contain directions, advice and warnings, before installing and starting to use the water purifier. It will then work in a correct manner and provide the greatest benefit. Everybody using the water purifier should be familiar with how to operate it and its safety features.
Safety information Waste management Old apparatus Packaging 80% of the components used in the appliance and its packaging are identified with symbols to assist the process of recycling and disposal. This labelling is in accordance with international standards. The packaging parts are made from recyclable corrugated board and can be deposited at collection points for recycling.
Product description ON CONTROL PANEL 8 FILTER SERVICE 6 9 10 1 2 3 4 7 5 6 2 3 11 7 12 1 2 3 4 5 6 Bracket for reject water hose Reject water hose Feed water hose Hose clip Angle bracket for pure water hose Pure water hose 7 8 9 10 11 12 -6- Connection to the indicator light on the faucet Pure water faucet Indicator light Button Adapter for feed water hose Filter spanner
Using the water purifier When the water purifier has been installed and flushed according to the instructions, it is ready to be used. The water purifier has an electronic control system which makes it easy to use. Remember the following: ● Change the filter when filter replacement is indicated on the control panel (2 - 3 times/year). ● Clean the purifier when the flow has reduced by 50%. Production of pure water To start pure water production: ● ● Press the button on the faucet once.
Maintenance Replacing the filter 4. Remove the old filter. It is important to pay attention to filter replacement, as the filter’s primary job is to protect the membrane. Check that the container is not leaking after filter replacement, and perform follow-up checks. 5. Wipe up any spillage on the base plate. 6. Clean the filter container with a brush and water. 7. Insert the new filter with the pin pointing up. Fill up the container with water to the lowest thread. 8.
Maintenance Descaling When the flow is reduced, the water purifier should be descaled to extend its lifetime. When the flow cannot be restored despite descaling and filter replacement, contact your dealer. During the descaling procedure, which takes around 10 hours, the water purifier cannot be used. A The descaling product can be ordered from your dealer, see «Consumables». The descaling product must be kept out of the reach of children! Wash your hands after using it. 1.
Maintenance Disinfection If the feed water has a high content of micro-organisms, the water might develop an odour if the water purifier is not used for an extended period of time (1 week). It is then necessary to disinfect it. After the disinfection the filter has to be changed. C The disinfectant, sodium hypochlorite (concentration approx. 3.5%, odourless), can be purchased from supermarkets or chemists. The disinfectant must be kept out of reach of children! Wash your hands after using it. 1.
Maintenance Storage E The water purifier should be put into storage if: ● it is going to be disconnected from water and electricity for an extended period (1 week or more). ● it is not going to be used to produce purified water for a period of 4 months or longer. Preserving agents can be ordered from your dealer, see «Consumables». The preserving agent must be kept out of reach of children! Wash your hands after using it. 1. Check that the water purifier is in standby mode. 2.
Maintenance Cleaning the grid G The grid blocks larger particles and is situated in the feed water connection. If the flow is reduced or the purifier makes a noise, the grid may be blocked. 1. Check that the water purifier is in standby mode. 2. Close the shut-off valve at the feed water connection. 3. Unscrew the feed water hose from the water purifier. 4. Using pliers or similar, grip and pull out the grid in accordance with fig. G. Remember which way the grid is installed. 5.
If the water purifier is not working Trouble-shooting table To protect the user and the water purifier from incorrect use, there are built-in alarms which cause the purifier to give an indication and stop. The table below gives probable causes of warnings given by the water purifier. SYMPTOM extinguished flashing lit CHECK/REMEDIAL ACTION ON light not lit. ● The water purifier is not receiving power. - Is the plug connected? Yellow light on the faucet flashing and filter light flashing.
Service Service and spare parts Before calling service, use the trouble shooting table «If the water purifier is not working» to try to attend to the fault yourself. If service is called in to solve a problem that is in this list, there is a risk that you will be responsible for the cost. This is also true if you have used the appliance for a purpose other than it is intended for. Note that electrical faults should always be rectified by a certified electrician.
Technical facts Dimensions: -height -depth -depth with hoses -width -weight (on delivery) -weight (filled with water) capacity (water temp. 15 °C) electrical connection total output operating cycle noise level when installing in undersink cupboard 462 mm 365 mm 390 mm 150 mm 15 kg 18 kg 2.5 (±0.4) l/min 2 hours <60 dB(A) Water efficiency - during operation - including flushing approx. 65 % approx.
Installation Unpacking ● ● ● ● If the appliance has been damaged during transportation, you should immediately notify the company responsible for delivering it. Carefully lift out the water purifier by taking hold of the plastic bag and the rear handgrip. The appliance can be damaged if it is lifted in any other way. Check the purifier for any signs of damage and check that no accessories are missing. Any damage, faults or missing parts should be notified to the supplier.
Installation Water connection D Feed connection: The water purifier is connected to cold water (2 - 40 °C) via the feed water hose. The connection should be supplied with an easily accessible shut-off valve, see fig. D. If the connection is with new pipes or pipes that have not been in use for an extended period, the water should be allowed to run for a while before the hose is connected in order to flush out sand and rust. 1.
Installation Connecting the water purifier Before the water purifier is placed in its intended position, remove the plug at the end of the reject water hose and the two plugs in the connections on the purifier, see fig. F. Connect the two hoses and the faucet cord to the appliance as shown in fig. G. F Feed water 1. Screw the bent end of the feed water hose onto the water purifier. Check that the seal is in place in the connection. See fig. G no. 1. 2.
Installation Flushing Moving the water purifier Flushing should take place when the water purifier: If you move the purifier from one place to another, you should remember the following points: ● is new and has never been used before ● is reinstalled after having been stored/protected against freezing ● has been cleaned, in order to rinse out the detergent ● has been fitted with a new membrane. Do not use the pure water until flushing is complete.
03-11
