User manual

50
■
Unsatisfactory washing results
■
Too little detergent or unsuitable detergent
has been used. An insufficient amount of
detergent leaves the laundry looking grey and
causes lime scale to form.
■
Stubborn stains have not been treated prior
to washing
■
The correct temperature to suit the wash
programme has not been selected.
■
Too much laundry has been placed in the
drum.
■
The machine vibrates when
spinning
■
The internal packing has not been removed.
■
The machine is in contact with the wall or
furniture.
■
The machine is not level.
■
The washing load is badly distributed in the
drum.
■
Maybe there is very little laundry in the drum.
■
The door will not open
■
The programme is still running.
■
The door lock has not yet released (door pilot
light on).
■
The water level in the drum is too high or the
machine is heating.
■
Spinning starts late or the
machine does not spin
■
The electronic unbalance detection device
has cut in because the laundry is not evenly
distributed in the drum. The laundry is
redistributed by reverse rotation of the drum.
This may happen several times before the
unbalance disappears and normal spinning
can resume eventually at a lower speed, if
the wash load is not perfectly distributed in
the drum. If, after 15 minutes, the laundry is
still not evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and reselect
the spin programme.