User manual

38
Modification of a programme which
is running
To modify a programme, first set the machine to
PAUSE by pressing the START/PAUSE button.
Before the machine starts the heating phase, i.e.
within the first 15 minutes for cotton
programmes, 10 minutes for synthetic and
delicate programmes and 5 minutes for the wool
programme, the following parameters can be
modified:
- Fabrics
- Temperature
- ECONOMY or QUICK WASH.
The PREWASH option can be cancelled, but
cannot be added, once the programme has
started.
The SPIN option can be modified before the
final spin and the EXTRA RINSE option can be
cancelled before the rinse cycle starts.
To restart the wash programme, press the
START/PAUSE button again.
Opening the door after the
programme has started
The door can only be opened before the
machine starts the heating phase (within the first
15, 10 or 5 minutes, depending on the
programme selected - see paragraph above).
Set the machine to PAUSE (by pressing the
START/PAUSE button).
If the door does not open, this means that the
machine is already heating, or that the water
level is above the bottom edge of the door.
This prevents large quantities of water from
gushing out when the door is opened.
The door can only be opened when the pilot
light next to the handle goes out.