User Guide

Yealink EXP40 User Guide
12
6. Enter the directed call pickup code in the Extension field (e.g., *30).
7. Click Confirm to accept the change.
Voice Mail
You can configure an Ext key as the voice mail key. Then you can press the voice mail key when
the phone is idle to dial out the pre-defined voice mail access code, and follow the voice prompt
to listen to the voice mails.
To configure an Ext key as the voice mail key:
1. Click on Dsskey->Ext Key.
2. In the desired Ext key field, select Voice Mail from the pull-down list of Type.
3. Enter the voice mail access code in the Value field (e.g., *97).
4. Enter the desired value in the Label field or leave it blank.
If you leave this field blank, the LCD screen of the EXP40 expansion module will display the
default label “Voice Mail”.