Manual

July 2017 | uniz3d.com

Quick Start Guide

1. Active Your Printer

1) Plug into a power supply and switch on the printer.

2) Connect PC with the printer by USB cable, connect to the printer's WI-

FI.

i. Find the SSID and password for this printer on the side label of the

printer.

ii. Open the Wi-Fi Setting on your PC or mobile phone, select the

corresponding Wi-Fi name and type in password to connect.

3) Connect to Wi-Fi

i. Find IP address on the side label of the printer.

ii. To access activation page on the browser of your PC or mobile

phone.

iii. Click on “Check Network Button” to check if the printer is connected

with internet, skip this step if already connected, otherwise continue

step IV

iv. Choose Wi-Fi from the SSID dropdown menu, type in password and

click on “connect button” to connect internet.