Manual

MAN70628 REV A
July 2017 | uniz3d.com
33
E MAINTENANCE MANUAL
1. Before using the printer, please be aware to adjust the 4 adjusting
screws at the bottom of the printer to ensure that the build platform is
leveled.
2. Please be aware to check if the LCD panel stick together with the resin
tank film when you use the printer. The area stick closely together, as
circled below, is darker than the area without sticking.
Normal Abnormal
3. Please make sure the build platform surface and the inside of resin tank
are clean and free of residue before printing in order to prevent LCD panel
damage;