Manual

July 2017 | uniz3d.com
32
10. Printed model has ripples on
the side
Z axis shaking
Return to the factory to repair
11. Oily liquid exuded at the
seams area in the front of the
label at the bottom of the
machine, and the level of the
liquid in the coolant tank is
significantly reduced
The cooling system is broken
Return to the factory to repair
12. In the first few layers of the
printing, there is a strange noise
when the build platform lift up,
and the build platform is not able
to lift up normally
The motor out-of-step
Slow down the motor speed when setting the
parameters
13.
There is a big difference in size
around the printed model for the
first few layers, exceed 1mm
The bottom of the build
platform and the LCD panel are
not parallel
For SLASH, adjust the build platform according
to the tutorial video
For SLASH+, adjust the build platform according
to the guide book